.
Ils parlent de nous !
Excellent site, produits aux meilleurs prix, envoi ultra rapide, je recommande!! +++...
Arnaud Beaugeard
Particulier
j’ai enfin monté la ligne by TPMS ! Et c’est vraiment une tuerie ! Bravo à vous...
Steven MiLon
Particulier
j'ai correctement réceptionné ma commande, super emballage antichoc et pièce impeccable...
Phil Berth
Particulier
Sous-catégories
FIESTA MK1 / MK2
FIESTA MK5
FIESTA MK6
Pro Hoses Ancillary Hose Kit for Fiesta Mk8 ST-200.
A 12-piece hose kit available in four different colours.
Part Number:PH/ANCFO28
Bring your Fiesta 1.0 100ps, 125ps and 140ps Eco Boost engine bay to life with Pro-Hose, the Professional choice.
Will Fit: Fiesta MK7 & MK8 1.0 Ecoboost
Pro Hoses silicone induction hose for Fiesta MK8 ST-200.
Replaces Ford's restrictive plastic intake hose with a smooth, large internal bore silicone hose upgrade for increased air flow and performance.
AIRTEC part no: PH/INDFO22
Transform your 1.0 EcoBoost engine bay, larger diameter pipework combined with AIRTEC induction kit means louder wastegate chatter, similar to Focus RS Mk2.
Fits:
Fiesta Mk7/7.5 1.0 EcoBoost 100ps, 125ps, 140ps.
Fiesta Mk8 1.0 & ST-Line
AIRTEC part no: ATMSFO50
A blowoff valve (BOV), dump valve or compressor bypass valve is a pressure release system present in most modern OEM road car applications. Its purpose is to prevent compressor surge / stalling and reduce wear on the turbocharger.
Will fit both, Fiesta 1.0 EcoBoost and Focus 1.0 EcoBoost.
AIRTEC's intercooler for the 100ps & 125ps 1.0 Eco Boost has proved to be a great upgrade on re-mapped cars
AIRTEC intercooler will fit 100PS / 125PS / 135PS and 140PS (Red and Black) models.
WILL NOT FIT FIESTA MK8
AIRTEC part no: ATINTFO35
Pro Hoses two-piece boost hose kit for Fiesta MK8 ST-200.
To replace the stock intercooler boost hoses.
Available in Gloss Black, Performance Blue, Race Red or Orange (Made to order - Please allow 2-4 Weeks)
AIRTEC part no: PH/BOSFO29
K&N dry charger sock now available for Fiesta Mk7 1.0 EcoBoost, ST180/200 and Fiesta Mk8 1.0 EcoBoost and 1.5 ST
See description for full application list.
Part no: ASSOCK1
Turbosmart's new Kompact VR09 Dual Port for the 1.0-litre EcoBoost is a billet aluminium replacement for the Fiesta & Focus factory plastic BOV.
The Dual Port is a 50-50 recirculation/vent-to-atmosphere valve for that classic vent-to-atmosphere BOV sound at high boost, and quiet operation at low boost.
Pro Hoses Two-Piece Coolant Hose Kit for Fiesta Mk8 ST-200.
A two-piece hose kit available in 4 different colours.
Part number: PH/COLFO29
Pro Hoses Two-Piece Coolant Hose Kit for Fiesta Mk8 ST-200.
A two-piece hose kit available in 4 different colours.
Part number: PH/COLFO29
AIRTEC high-flow turbo hard pipe for the Fiesta 1.0 EcoBoost improves the pressure drop across the charge system, improving the efficiency of the engine and improving the ability for additional performance to be added.
AIRTEC part no: ATMSFO51
AIRTEC Motorsport 2.3″ Decat pipe
Allows exhaust gases to flow much faster. More Power!
Expect more popping and a deeper exhaust note. Gain up to 10+ bhp (Depending on your car)
AIRTEC part no: ATEXHFO8
The Kompact EM series combines world leading electronics and 20 years of blow off valve technology together to provide rapid response. The EM series is a true plug and play upgrade for OE electronic diverter valves. Featuring patent-pending pressure control, these units are faster than OE, don't leak and don't interfere with OE control systems.
Part number: TS-0941-1014
AIRTEC Motorsport boost gauge kit for Fiesta 1.0 Ecoboost
The AIRTEC Motorsport Fiesta MK7 boost gauge kit, supplied with Turbo Smart Boost Gauge in PSI or BAR.
A simple modification with a OEM look.
The Kompact EM series combines world leading electronics and 20 years of blow off valve technology together to provide rapid response. The EM series is a true plug and play upgrade for OE electronic diverter valves. Featuring patent-pending pressure control, these units are faster than OE, don't leak and don't interfere with OE control systems.
TS-0941-1013
Stage 2 induction kit is now on sale! Cold feed, Billet alloy maf sensor fitting, powder coated heat-shield and huge extreme filter
Expect to see gains of 5-10bhp compared to the original Airbox.
Enhanced induction sound, great looks and loud recirculation dumpvalve noise on let off.
The new design Stage 2 induction kit that works perfectly with the standard Fiesta.
Registered Design Right number: 6033435
AIRTEC part no: ATIKFO5
1.0 Eco-Boost Turbo / Boost Hose Kit.
Made by Pro Hoses.
Please note:
Gloss Black, Race Red, Performance Blue normally kept in stock.
Other colour hoses, made to order
Finally an off the shelf way to fit a Race Tow Strap, no bumper removal and then never using it because your to scared it may crack your bumper due to being bolted in a incorrect towing position.
Thread available on its own, or with the optional tow strap.
AIRTEC part no: ATMSFO57
AIRTEC Motorsport Rear Diffuser Extension for Fiesta MK8 ST-200.
Made in house at AIRTEC HQ, our simple rear diffuser extension comes complete and ready to fit and improves the look of your car.
Registered Design Right number:
AIRTEC part no: ATMSFO80
Removes Fords restrictive secondary induction hose with a smooth large internal bore silicon hose upgrade.
Made with a large 60mm bore inner diameter and made to fit perfectly the secondary induction hose upgrade is available in a variety of colours.
Bring your Fiesta EcoBoost engine bay to life with Pro Hoses, the professional choice.
Will fit: Fiesta Mk7 & Mk8 1.0 EcoBoost
Gloss Black, Race Red, Performance Blue normally kept in stock.
Replacement air filter for the Fiesta MK7 and Mk8 models.
- Fiesta Mk7 1.6 ST180 Stage 2 & Stage 3 induction kit
- Fiesta Mk7 1.0L EcoBoost Stage 2 induction kit
- Fiesta Mk8 1.5 ST200 induction kit
AIRTEC part no: ATIKFIL3
AIRTEC's Stage 2 intercooler for the 100ps & 125ps, 140ps, 1.0 Eco Boost has proved to be a great upgrade on standard or re-mapped cars.
AIRTEC intercooler will fit 100PS / 125PS / 135PS and 140PS (Red and Black) models.
AIRTEC part no: ATINTFO37
AIRTEC are proud to introduce the front mount intercooler upgrade for the Mk6 Fiesta 1.6 diesel TDCI.
Designed to fit all 1.6 diesel models.
PLEASE NOTE: This intercooler kit will require trimming to the bumper and radiator cradle.. But its worth it!
Hose colour shown for illustration only.
AIRTEC part no: ATINTFO45
As part of our expanding Fiesta Mk8 platform product range, AIRTEC Motorsport is proud to launch our enclosed intake kit for the 2020 onwards 1.0-litre and ST-Line suitable for track or fast road use.
Light weight tube and fin core, perfect for a supercharged or turbocharged Fiesta ST150.
Direct fit for standard radiator and 25mm thicker to provide greater cooling performance.
Key Features:
1. Light weight tube and fin core
2. Direct replacement for standard radiator, fits with air-con & standard fan
3. 45mm all alloy core - a must for track days
4. Natural Silver or Pro-Series Black finish
Available in Pro-Series Black or Natural Silver
AIRTEC part number: ATRADFO11
Pro Hoses Induction Hose for Fiesta MK8 1.0 & ST-Line
Designed to replace the restrictive OEM pipe, this larger silicone hose offers increased flow.
Perfect for your Turbo'd or Supercharged ST150 & an ideal Intercooler for custom TDCI diesel upgrade (extra parts required to fit)
Available in Pro-Series Black or Natural Silver
Approximate Dimensions:
Width 864mm
Height 170mm
Thickness 70mm
AIRTEC part number : ATINTFO40
Ford Fiesta MK6 bonnet lifter kit.
This kit is an easy and simple DIY modification to make to your car.
Performance silicone hose kit for the Fiesta MK6 1.6 TDCI , Kit contains 4 turbo / boost hoses.
Made by Pro Hoses.
Available in a variety of colours.
NEW From SUMMIT Fiesta MK7 rear lower middle 4-point aluminium forged solid alloy exhaust tunnel body chassis brace.
Normally found on Rally Stages and Drift events, these precision made braces are now available for Fast Fords.
Fiesta MK7 & 7.5, MK8 1.0 / 1.5 ST