The highest pressure external wastegate of its kind in the world. The Turbosmart Comp-Gate40HP (40mm) External Wastegate retains the compactness and lightness synonymous with Turbosmart wastegates with the added bonus of being capable of handling high boost pressures.

The highest pressure external wastegate of its kind in the world. The Turbosmart Comp-Gate40HP (40mm) External Wastegate retains the compactness and lightness synonymous with Turbosmart wastegates with the added bonus of being capable of handling high boost pressures.

The highest pressure external wastegate of its kind in the world. The Ultra-Gate38HP retains the compactness and lightness synonymous with Turbosmart wastegates, specifically for classic 2 bolt flanges (71mm spacing) and the added bonus of being capable of handling high boost pressures.

Only 28mm taller than the standard Ultra-Gate38 these wastegates are ideal for all high boost applications.

The highest pressure external wastegate of its kind in the world. The Ultra-Gate38HP retains the compactness and lightness synonymous with Turbosmart wastegates, specifically for classic 2 bolt flanges (71mm spacing) and the added bonus of being capable of handling high boost pressures.

Only 28mm taller than the standard Ultra-Gate38 these wastegates are ideal for all high boost applications.

The Turbosmart Hyper-Gate45 is a 45mm external wastegate designed with minimum size and maximum flow in mind. Smaller and lighter than the previous model, the new Hyper-Gate45 features a unique locking collar design for reduced size and quicker spring changes. (Options from 3psi to 26psi available). Features Solid 1 Piece coated Stainless Steel Valve and silicon nomes diaphragm proven for performance and reliability.

The Turbosmart Hyper-Gate45 is a 45mm external wastegate designed with minimum size and maximum flow in mind. Smaller and lighter than the previous model, the new Hyper-Gate45 features a unique locking collar design for reduced size and quicker spring changes. (Options from 3psi to 26psi available). Features Solid 1 Piece coated Stainless Steel Valve and silicon nomes diaphragm proven for performance and reliability.

Turbosmart's Comp-Gate40 (40mm) external wastegate was designed to fit into tight engine bays while still offering superior flow and heat handling capabilities. The revolutionary actuator housing is 25% smaller than previous designs and allows for easy spring changes (from 3psi to 26psi available) with our locking cap design and gives the ability to index the cap orientation in 12 different positions.

Turbosmart's Comp-Gate40 (40mm) external wastegate was designed to fit into tight engine bays while still offering superior flow and heat handling capabilities. The revolutionary actuator housing is 25% smaller than previous designs and allows for easy spring changes (from 3psi to 26psi available) with our locking cap design and gives the ability to index the cap orientation in 12 different positions.

Following an extensive development process, AIRTEC Motorsport are proud to launch our turbo cooler and auxiliary radiator kits aimed at modified Yaris GR owners who require the ultimate cooling package to maintain steady running temperatures on track or fast road use.

AIRTEC part no: ATRADYGR1

Following an extensive development process, AIRTEC Motorsport are proud to launch our auxiliary radiator and turbo cooler kits aimed at modified Yaris GR owners who require the ultimate cooling package to maintain steady running temperatures on track or fast road use.

AIRTEC part no: ATRADYGR2

This is our biggest oil cooler kit to date offering a huge 51% increase in volume over our Stage 1 oil cooler. Spanning across the entire front grille area for maximum air flow, the comprehensive kit also features new laser cut ducting to force cold air through the cooler.

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver's and passenger's side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.

AIRTEC Part Number: ATMER45

A direct replacement part that offers increases in performance, response and sound, our enlarged hot side boost pipe features a freer-flowing design with an increased internal diameter measuring 60mm throughout its entire length, offering an increase of 33% over the original 45mm pipework.

It also eliminates the internal sound suppressors built into the original pipework. Kia fit these suppressors to reduce noise and resonation, and by replacing the pipe for one without the baffled internals, flow as well as noise is further improved.

AIRTEC Part No: ATMSKIA3

Made from high-quality silicone the improved design offers increased capacity as well as smoother internal flow and can work with either the original air boxes or AIRTEC Motorsport induction kit.

AIRTEC Part No: ATMSKIA4

AIRTEC Motorsport Embroidered High-Quality Car Mats Finished in black with a contrasting white AIRTEC Motorsport embordered logo on both the driver's and passenger's side, these mats offer a superb high-quality feel thanks to a thick base and deep carpet material.

AIRTEC Part Number: ATMER49

Designed to fit with our AIRTEC Motorsport enclosed induction kit or the original air box, the replacement air feed fits in place of the original but offers improved flow by increasing the intake area. This allows it to draw in more fresh air and direct it towards the air filter, keeping a constant supply of cool air.

AIRTEC Part No: ATMSFO142

Designed and developed at AIRTEC HQ in the UK, our solution was to develop a secondary intercooler that mounts underneath the car behind the undertray and is fed fresh air from a duct.

AIRTEC Part Number: ATINTFO61

Developed in-house at AIRTEC HQ in the UK, we've created a comprehensive solution to improving the car's oil cooling ability for modified Mk8.5 ST owners who struggle to maintain steady oil temperatures on track, or during fast road use.

With vast experience in developing uprated cooling packages for a variety of modified track and road cars, the challenge with the Mk8.5 Fiesta ST was the very limited available space directly behind the open grille area.

During the development of our AIRTEC Motorsport enclosed air box and oil cooler kits, we created an additional cold air feed solution for cars fitted with our Stage 3 intercooler to further improve the cooling ability and reduce air intake temperatures on track or during fast road use.

In order to ensure there is no noticeable loss in performance during extended periods of hard driving, we have developed a larger, freer-flowing intercooler that is a direct replacement for the smaller and more restrictive OEM item.

AIRTEC part no: ATINTP&C11

Developed in-house at AIRTEC HQ in the UK, we've created a comprehensive solution to improving the car's original air intake system to allow more flow whilst maintaining low intake temperatures, improving response, as well as sound and aesthetics within the engine bay.

AIRTEC Part No: ATIKP508

As part of our expanding BMW M2 N55 product range, AIRTEC Motorsport are proud to launch our cold side boost pipe kit for track or fast road use.

Designed to work with our uprated cold side boost pipes, our direct replacement hot side pipe is made from high quality aluminium construction and also features an increased diameter to improve both capacity and flow. The pipes also feature a CNC-machined flange on either end that retains the original o-ring and spring clip to ensure a perfect fitment.

AIRTEC Part No: ATMSBMW10

As part of our expanding BMW N55 product range, AIRTEC Motorsport are proud to launch our cold side boost pipe kit for track or fast road use.

In original form, due to the thin plastic construction these pipes are known to split or fracture even at standard levels of boost and when pressure is increased with a remap they are more prone to failure.

AIRTEC Part No: ATMSBMW9